NXP Semiconductors /MIMXRT1011 /ADC_ETC /TRIG1_CTRL

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as TRIG1_CTRL

Description

ETC_TRIG Control Register

Fields

SW_TRIG	Software write 1 as the TRIGGER. This register is self-clearing.
TRIG_MODE	TRIG mode register. 1’b0: hardware trigger. 1’b1: software trigger.
TRIG_CHAIN	TRIG chain length to the ADC. 0: Trig length is 1; … 7: Trig length is 8;
TRIG_PRIORITY	External trigger priority, 7 is highest, 0 is lowest .
SYNC_MODE	TRIG mode control . 1’b0: Disable sync mode; 1’b1: Enable sync mode
CHAINx_DONE	CHAINx done interrupt detection bit 0: CHAIN0 done interrupt bit 1: CHAIN1 done interrupt bit 2: CHAIN2 done interrupt bit 3: CHAIN3 done interrupt bit 4: CHAIN4 done interrupt bit 5: CHAIN5 done interrupt bit 6: CHAIN6 done interrupt bit 7: CHAIN7 done interrupt The done interrupts are cleared by writing a logic 1 to the bits

Links

() ()